BT articulated claws

BT articulated claws

The "BT" model JAGUAR articulated claw is equipped with an articulated lifting ring for lifting, turning over or vertically transporting metal sheets whilst maintaining total gripping force on the opening.

● The lever-activated safety closing device located on one side of the device makes it easier to simply grip the load.
● The lever, fitted with a strong spring, keeps the load blocked safely even when supported and there is no tension in the ring.
● The jaws are made of tempered steel, with a toothed surface. They grip the part to be transported effectively and positively, obtaining optimum results.
● The hardness of the metal sheets to be raised should not be higher than HRC 37 (HB-345).
● The minimum work load should not be lower than 7.5% of the maximum work load.
● The lifting capacity and opening are etched sideways on the body.

IT IS RECOMMENDED TO LIFT JUST ONE SHEET OF METAL AT A TIME.
IF THE LOAD IS WIDE, IT IS BEST TO USE AT LEAST TWO CLAWS WITH A 2 LEG BRIDLE SLING OR WITH A ROCKER ARM.

 

B fixed claws

B fixed claws

The "B" model JAGUAR claw is designed to vertically transport metal sheets whilst total gripping force is maintained on the opening.

● The lever-activated safety closing device located on one side of the device makes it
easier to simply grip the load.
● The lever, fitted with a strong spring, keeps the load blocked safely even when
supported and there is no tension in the ring.
● The jaws are made of tempered steel, with a toothed surface. They grip the part to be
transported effectively and positively, obtaining optimum results.
● The hardness of the metal sheets to be raised should not be higher than HRC 37 (HB-345).
● The minimum work load should not be lower than 7.5% of the maximum work load.
● The lifting capacity and opening are etched sideways on the body.

IT IS RECOMMENDED TO LIFT JUST ONE SHEET OF METAL AT A TIME.
IF THE LOAD IS WIDE, IT IS BEST TO USE AT LEAST TWO CLAWS WITH A 2 LEG BRIDLE SLING OR WITH
A ROCKER ARM.

Fine sheet metal magnetic hoist, "EMF" model

Fine sheet metal magnetic hoist, "EMF" model 

The "EMF" model double strand manual magnetic lifts are used for raising and handling ferromagnetic material in flat and cylindrical shapes. Its double central axis allows us to grip thinner materials (from 5mm) improving working conditions and thereby increasing safety when handling materials.

DC-DL horizontal claws

DC-DL horizontal claws

● These claws are ideal for horizontally transporting metal sheets and packages of metal sheets
● The difference between the "DC" and "DL"models is the opening capacity.
● All these claws come with powers between 1,500 and 10,000 kg.
● The hardness of the metal sheets to be raised should not be higher than HRC 37 (HB-345).
● The minimum work load should not be lower than 7.5% of the maximum work load.

THE MAXIMUM WORKLOAD IS FOR THE SET OF 2 UNITS
IF THE LOAD IS WIDE, IT IS BEST TO USE A ROCKER ARM

 

R claws for rounded shapes

R claws for rounded shapes

"R" model JAGUAR claws easily transport all types of rounded pipes and bars. These items can be gripped when resting on the ground without having to raise them to be able to pass a strap underneath them.

● The minimum work load should not be lower than 7.5% of the
maximum work load.

 

BTX claws for stainless steel

BTX claws for stainless steel

The "BTX" model JAGUAR articulated claw is manufactured for lifting metal sheets and stainless steel structures.

● The pivot, the segment and the pin are made out of stainless steel.
● The body and the safety mechanism are nickeled to prevent corrosion
due to carbon contamination.
● The minimum work load should not be lower than 7.5% of the maximum
work load.
● The lifting capacity and opening are etched sideways on the body.
● The minimum work load should not be lower than 7.5% of the maximum
work load.

IT IS RECOMMENDED TO LIFT JUST ONE SHEET OF METAL AT A TIME.
IF THE LOAD IS WIDE, IT IS BEST TO USE AT LEAST TWO CLAWS WITH A 2 LEG BRIDLE SLING OR WITH A ROCKER ARM.

BV claws for beams

BV Claws for beams

For lifting and transporting steel beams, profiles and structures when the load should be in position. The special shape of the ring positions the beam's centre of gravity below the ring. This keeps the raised beam balanced and holds the edges vertical so the beam can be easily stacked or positioned. Particularly recommended for transport and stacking steel beams. The lifting capacity and opening are etched sideways on the body.
The minimum work load should not be lower than 7.5% of the maximum workload.

 

BTV claws for vertical pipes

“JAGUAR” lifting hooks "BTV" model claw

The "BTV" model JAGUAR claw is manufactured to lift and vertically transport concrete and hollow piping.

● They must be used in pairs or in threes.
● The moving part is equipped with a high pressure plastic surface.
● The minimum work load

DH claws for horizontal pipes

“JAGUAR” claws for lifting and transport "DH" model claw

The "DH" model JAGUAR claw is manufactured to lift and vertically transport concrete and steel piping.

● Compact and relatively light with high lifting capacity.
● They come in pairs.
● The plastic cover can be easily changed.
● The minimum work load should not be lower than 7.5% of the maximum work load.

 

Clip for drums

Clip for drums "PBID" model clip

The clip for metal drums can hold drums in a horizontal position and raise them plus transport drums vertically.
This clip is ideal for holding drums that are placed very close together.
Drums can also be transported without lids.

Hooks for drums

Hook for drums "GBID" model hoook

The clip for metal drums can hold drums in a horizontal position and raise them plus transport drums vertically.
This clip is ideal for holding drums that are placed very close together.
Drums can also be transported without lids.

 

Ratchet tensioners

Ratchet tensioners

The JAGUAR ratchet tensioner is a safe, easy to handle tool for tensioning and securing loads.

● The threaded spindles move to one side to open and to the other side to close by moving the lever.
● The spindle thread is trapezoid and constantly holds the load taut.
● The JAGUAR ratchet tensioner comes with two hooks or with two eyebolts to connect them directly to the chains or to other joining elements.

 

Manual magnetic hoist "EM" model

Manual magnetic hoist "EM" model 

The manual magnetic hoists are used to grip ferromagnetic cylindrical and flat parts for handling and lifting from a minimum thickness of 10 mm.
They are built compactly and are easy to handle, strong in terms of gripping force with reliable characteristics. This helps to improve the working conditions and increase productivity. Consequently these lifts have often been used as lifting devices in factories, boilerworks, stores and means of transport.

 

BNM claws that leave no marks

“JAGUAR” lifting hooks "BNM" model claw

The "BNM" claw is a claw with two special synthetic pads that leave no marks.
The claw can be used for lifting, handling and transporting (stainless) steel, aluminium, wood and marble slabs.

After raising and handling the claw leaves no marks. The claw is locked in both open and closed positions.

The lifting capacity and opening are etched sideways on the body.
The minimum work load should not be lower than 7.5% of the maximum work load.

 

BL claws for blocks

"JAGUAR" claws "BL" model claw

● The "BL" model JAGUAR claw is manufactured for vertical lifting and transporting different products with parallel sides without damaging or marking the product, valid for all types of materials such as steel, wood, plastic, concrete, marble, etc.
● The claw is locked in the open position. In order to carry out the lifting, the operator should activate the lever and hold it up until the eyebolt goes up. By positioning the load on the ground, the claw releases the load automatically.
● The jaws are coated with a special plastic to prevent damage or marking the load.
● The minimum work load should not be lower than 7.5% of the maximum work load.